Skip to main content
/

Site Navigation

Your Account

Choose Language

v1.4

Minor Versionm

Approved Bondtech QC Lite

by Nuno Santiago

Introduction

Bondtech's Product Page

This Guide relates to this Intamsys Funmat HT Upgrade Kit:

https://www.bondtech.se/en/product/bmg-h...


Notice

This is a Firmware Update Guide only. Use the Hardware Installation Guide to start the BMG-HT for Funmat HT setup.

  1. Use the touch display interface to setup the Extruder Current Press "Settings"
    • Use the touch display interface to setup the Extruder Current

    • Press "Settings"

    • Press "Other Param"

  2. Press the Scroll Down Button until the option"Motion Settings" is selected. Press the Check button to enter the option.
    • Press the Scroll Down Button until the option"Motion Settings" is selected.

    • Press the Check button to enter the option.

  3. Click the Scroll Down button until the option "Current E" is selected.
    • Click the Scroll Down button until the option "Current E" is selected.

    • Default Extruder Current is 800 mA.

    • Press the Check button to change the Current E value

  4. Press the Minus button until you reach the 700 mA.
    • Press the Minus button until you reach the 700 mA.

    • Press the < (Back) button after the 700 mA value is reached.

  5. Create a new Text Document Edit it with NotePad Insert the following G-code command:
    • Create a new Text Document

    • Edit it with NotePad

    • Insert the following G-code command:

    • M92 E415; set e-steps value

    • Insert the following G-code command:

    • M500; save settings

  6. Name it SetEsteps415.gcode You can use any other name but the extension must be gcode
    • Name it SetEsteps415.gcode

    • You can use any other name but the extension must be gcode

    • Set the type to All Files

    • Set the encoding to ANSI

    • Click Save to store the file

    • Checking the properties of the file, the name must end with gcode.

    • If the name in the properties dialog box ends in .txt, create a new file and follow this instructions to properly name it.

  7. To change the e-steps value in the firmware we will &quot;print&quot; a specific g-code file.
    • To change the e-steps value in the firmware we will "print" a specific g-code file.

    • Press the Print button to access the list of files in the SD-Card.

  8. Press the Down Arrow button...
    • Press the Down Arrow button...

    • ... until the SetEsteps415 file is selected

    • Click the Check button to run the Gcode

    • Congratulations!!! Your Firmware Update is completed.

Conclusion

You've finished the installation of the BMG-HT in what regards to the Firmware update. If you previously followed and completed the Hardware Installation Guide you are ready to start 3D printing!!!

Enjoy your Intamsys Funmat HT with our Bondtech BMG-HT !!!

Nuno Santiago

Member since: 04/02/2019

37 Guides authored

Team

BT Authors Member of BT Authors

Community

4 Members

60 Guides authored

One Comment

These instructions do do work for the FunMat HT Enhanced, will this extruder not work with the newer FunMat HT?

Paul Butcher - Reply

Add Comment