01. Direct Drive for CR-10S - Unboxing

Written By: Nuno Santiago

Comments: 2
Favorites: 0

Difficulty

Very easy

Steps

Time Required

00:03:00

Introduction

This Guide relates to this Direct Drive System for Creality CR-10S Upgrade Kit:

https://www.bondtech.se/en/product/bondt...

Step 1 Unboxing

Cut the 3 clear tape straps to enable opening the box.

Step 2 What's in the box

Main assembly includes: BMG Extruder; E3D V6 hotend; Power Cable

Main assembly includes: BMG Extruder; E3D V6 hotend; Power Cable
Bondtech BMG Extruder
E3D V6 Hotend
Radial Part Cooling Fan
Filament Sensor Housing with Steel Ball
Bondtech Accessories Bag
E3D V6 Accesories Bag
Power Cable

Step 3 The New Filament Sensor Housing

Due to changes in the CR-10S posterior to our DDS for CR-10S product launch, Bondtech received feedback from customers informing us the original Filament Sensor Housing would not fit the printer.

For that reason we have a new one, that fits the initial and the posterior model. This Housing has replaced the previous and is currently shipping in the box.

Check the Filament Sensor Housing first, before uninstalling the original extruder. If you have a new CR-10S model, you will have to print a new bracket to fit your printer. See Download link below.

Due to changes in the CR-10S posterior to our DDS for CR-10S product launch, Bondtech received feedback from customers informing us the original Filament Sensor Housing would not fit the printer.
For that reason we have a new one, that fits the initial and the posterior model. This Housing has replaced the previous and is currently shipping in the box.
Check the Filament Sensor Housing first, before uninstalling the original extruder. If you have a new CR-10S model, you will have to print a new bracket to fit your printer. See Download link below.
For Customers that have the newer CR-10S model, but bought the original package we are supplying the new STL model of the mount bracket. You can download it here:

Finish Line

Author

Nuno Santiago

Member since: 04/02/2019

4,210 Reputation

18 Guides authored

Team

BT Authors Member of BT Authors

Community

4 Members

38 Guides authored

2 Comments

Add a comment

Please note: On the pictures you see the old Filament Sensor Housing with Steel Ball!!! If this is in your package, try to fit it on your CR10S before you install the extruder. Because if it’s not, you need to print the new version. Just write the support in this case to get the stl for it.

Tom Wolfram - August 15 Reply

Dear Tom,

Thank you for alerting users to the filament sensor housing fitting issue. It is true that our first batches of DDS Systems included a filamento sensor mount that was fitting the previous version of the CR-10S, but not the new one.

For that reason we added an alert in this guide and we are also adding it to the DDS setup as well.

Nuno Santiago - September 3